The
world’s most certified fire protection sleeve. The only thermal
protection firesleeve to achieve UL certification and VW-1 Flame
Resistance rating.
Thicker,
denser inner glass fibre than our Industrial grade Pyrojacket® Fire
sleeve gives higher insulation values, increased
strength and enhanced abrasion resistance.
Sheds
splash immediately
Aerostyle Pyrojacket® firesleeve withstands repeated exposures to
molten steel, molten aluminium and molten glass up to 3000°F
(1650°C). The heavy coating of our proprietary firesleeve iron oxide
red silicone rubber compound sheds molten metal splash immediately,
so very little heat transfer occurs.
Withstands
intense radiant heat and flame
Aerostyle Pyrojacket® firesleeve will withstand continuous exposure
to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes;
and up
to 3000°F (1650°C) for 15-30 seconds.
When
exposed to flames, the silicone rubber transforms into a crust, creating
a protective SiO2 refractory layer.
Aerostyle Pyrojacket® firesleeve is constructed from high bulk glass
fibre braided sleeve. Excellent modulus of elasticity makes it an ideal
choice for bundling hoses, tubes and cables in a variety of hostile
environments.
Custom
colours available by special order.
Guard
against fraying and absorption
Newly developed Odourless End Dip™ is designed to coat Pyrojacket®
and Pyroblanket™ at the ends. This special formulation of liquid
silicone rubber prevents fraying and the absorption of flammable oils
or other contaminants into exposed glass fibres.
Certifications
Aerostyle
Pyrojacket firesleeve has received certified test reports for the following
criteria:
-
GL – Germanischer Lloyd Certified for 800°C
for 30 minutes
- UL
1441 Certified for flame resistance, oil resistance, and dielectric
strength
- VW-1
Flame Test Certified
- MSHA
IC-258/1 Certified for use in underground mines
- Thermal
Conductivity ASTMC177
- Molten
Splash Resistance BS EN 373
- Abrasion
Resistance BS EN 388
- Flame
Resistance BS EN ISO 6940:2004
- Oil
Resistance BS EN ISO 6530:2005
- Tensile
Strength BS 2576
- Rail
Vehicle Certified for Resistance to Combustibility DIN 54837 / 5510-2
- Rail
Vehicle Certified for Toxicity DIN5659-2 / 5510-2
Aerostyle
Pyrojacket® fire sleeve is manufactured according to the SAE AS1072
standard, enabling qualified hose manufacturers to use
these sleeves in order to meet SAE AS1055 standards for completed hose
assemblies. (This requires a certified test of the complete hose
assembly - hose, fittings, and Pyrojacket® firesleeve.)
|
